BEARING MOUNT
BEARING MOUNT
The bearing mount holds one of the 1" bore bearings inside of it. The motor end shaft on the front swing arm slides into this and is locked into place with the key way. The motor then spins the motor end adapter in the bearing operating the roll tube making the tarp system roll up; or unroll to uncover a load.
BEARING MOUNT
The bearing mount holds one of the 1" bore bearings inside of it. The motor end shaft on the front swing arm slides into this and is locked into place with the key way. The motor then spins the motor end adapter in the bearing operating the roll tube making the tarp system roll up; or unroll to uncover a load. The bearing makes it so that the tarp motor has the least amount of resistance on it possible for flawless operation. The bearing bolts inside of this cover and then the cover is bolted onto the drive mount channel assembly. This is just the bearing mount; bearing and hardware is not included.
PLEASE NOTE: The bearing for this bearing mount is 1001-861714. One bearing mounts into this bearing mount; and the other bearing mounts onto the drive mount channel. Both bearings are the same part number and same bearing.
